Post-Tensioned Beams में Cables का Layout कैसे करें? | PSC Design in Hindi


Post-Tensioned Beams में Cables का Layout कैसे करें? | PSC Design in Hindi

Prestressed Concrete (PSC) में post-tensioned beams के design में tendon/cable layout एक critical factor है। सही cable layout structure को safe, crack-free और economical बनाता है। IS 1343 code guidelines के अनुसार cables का layout design किया जाता है ताकि bending moment और shear force के अनुसार stresses controlled रहें।

Cables Layout की Objectives

  • Beam के top और bottom fibers में tensile stresses control करना।
  • Service load conditions में permissible stress maintain करना।
  • Beam की deflection और cracking को minimize करना।
  • Construction और anchorage की feasibility सुनिश्चित करना।

Cable Layout Principles (IS 1343)

  • Cables eccentricity calculate करें ताकि required bending moment counter हो सके।
  • Cable profile generally parabolic या draped होती है।
  • End anchorage points top fiber के पास और midspan bottom fiber के पास रखें।
  • Uniform or varying spacing maintain करें ताकि prestress uniform हो।
  • Shear zones में cable abrupt bends avoid करें।

Step-by-Step Layout Design

  1. Determine maximum positive and negative bending moments along the beam।
  2. Choose initial tendon profile (straight or draped) according to moment diagram।
  3. Calculate required prestressing force and eccentricity at key sections।
  4. Adjust tendon profile to ensure concrete stress within permissible limits (IS 1343) at service load।
  5. Check minimum cover, spacing between tendons और duct dimensions।
  6. Verify losses (elastic shortening, creep, shrinkage, relaxation) and ensure net prestress effective।

Important Considerations

  • Tendon curvature should be smooth to avoid stress concentration।
  • Shear reinforcement coordination with tendon layout।
  • Construction feasibility and anchorage space provision।
  • Serviceability limits (deflection and crack width) satisfy हों।

निष्कर्ष

Post-tensioned beams में cable layout सही ढंग से design करने से structure crack-free, durable और economical बनता है। IS 1343 code के guidelines का पालन करने से bending moments और service loads के अनुसार prestress effectively distribute होता है।

Related Post